Curriculum
- 15 Sections
- 61 Lessons
- 22 Hours
Expand all sectionsCollapse all sections
- Module 1: SACS Basics + Project Setup5
- 1.1What SACS is used for in offshore structural work (jacket/topside)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 1.2Installing/opening projects, interface walkthroughCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 1.3Units system, database setup, file structureCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 1.4Typical project workflow and naming standardsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 1.5Common mistakes: unit mismatch, wrong project templateCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 2: Modeling Fundamentals (Nodes, Members, Grids)4
- 2.1Creating nodes, coordinate system and grid setupCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 2.2Member creation, member connectivity rulesCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 2.3Grouping strategy (legs, braces, beams)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 2.4Model cleanup and basic geometry QACopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 3: Member Properties + Sections4
- 3.1Assigning section libraries (tubular, rolled, built-up)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 3.2Material properties (steel grades) and density assumptionsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 3.3Member orientation, beta angle, local axesCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 3.4Checks: section assignment errors, duplicate membersCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 4: Releases, Offsets, Eccentricities4
- 4.1End releases and where to use them (realistic joints)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 4.2Member offsets and connectivity correctionsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 4.3Rigid links / eccentricities for real joint modelingCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 4.4QA: unstable model causes and quick fixesCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 5: Boundary Conditions (Supports & Constraints)4
- 5.1Restraints: fixed/pinned/custom DOF settingsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 5.2Support modeling for jacket/topside assumptionsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 5.3Stability checks and warning interpretationCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 5.4Good practice: restraint documentation for reviewersCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 6: Load Fundamentals (Dead, Live, Equipment)4
- 6.1Self-weight setup (automatic vs manual)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 6.2Live load patterns for platformsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 6.3Equipment loads, lumped loads, area loads conceptsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 6.4QA: missing self-weight, wrong directionsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 7: Environmental Loading Overview (Practical Inputs)4
- 7.1Wind load basics: what you enter vs what you calculate elsewhereCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 7.2Wave/current basics: practical understanding for SACSCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 7.3Load application points, directions, reference elevationsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 7.4Mistakes to avoid: sign convention, elevation errorsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 8: Load Cases + Load Combinations4
- 8.1Defining load cases properly (naming, purpose)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 8.2Creating combinations: operating, storm, extreme, accidentalCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 8.3Code-based combinations and project-specific logicCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 8.4QA: duplicate combos, missing governing casesCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 9: Running Linear Static Analysis4
- 9.1Solver setup and running analysisCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 9.2Understanding output files and result summariesCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 9.3Reaction checks, deflection sanity checksCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 9.4Interpreting warnings vs errors (what must be fixed)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 10: Results Interpretation (For Real Review Cycles)4
- 10.1Member forces, utilization, deflection checksCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 10.2Load path verification (does it “make sense”?)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 10.3Identifying governing members and hotspotsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 10.4Exporting results for reports and checking sheetsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 11: Member Code Checks (Unity Ratio Workflow)4
- 11.1Selecting codes and parameters (practical approach)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 11.2Running member check modulesCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 11.3Understanding unity ratio, interaction equationsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 11.4Fix strategy: section change vs bracing vs boundary updatesCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 12: Joint Can / Connection-Level Checks4
- 12.1What joint can checks mean in offshore structuresCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 12.2Input requirements and typical modeling assumptionsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 12.3Reading joint check output, failure modesCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 12.4Common fixes: geometry refinement, member end conditionsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 13: Dynamic Analysis Basics (Modal / Practical Setup)4
- 13.1When dynamic analysis is needed in offshore projectsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 13.2Modal extraction basics and setupCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 13.3Mass modeling assumptions and validationCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 13.4Interpreting mode shapes and participationCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 14: Pile/Soil Modeling Overview (Job-Oriented)4
- 14.1Pile modeling basics: springs vs simplified assumptionsCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 14.2Soil stiffness concepts (what you must understand)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 14.3Input approach and sensitivity checksCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 14.4Output review: pile reactions, base shear, stabilityCopyCopyCopyCopyCopyCopyCopyCopyCopy
- Module 15: Fatigue Analysis Workflow + Reporting4
- 15.1Fatigue basics: what drives fatigue in offshore structuresCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 15.2Setting up fatigue cases (practical workflow)CopyCopyCopyCopyCopyCopyCopyCopyCopy
- 15.3Reading fatigue life outputs and hotspot reviewCopyCopyCopyCopyCopyCopyCopyCopyCopy
- 15.4Report-ready formatting + QA checklist + final project wrap-upCopyCopyCopyCopyCopyCopyCopyCopyCopy